How to Replace a Nivito Kitchen Faucet Hose
You've noticed a leak coming out of your Nivito faucet, and now you're wondering how to replace the hose. Here are some instructions for replacing this type of faucet hose. Before beginning the process, you should know the type of faucet you have and where it's located. To make things easier, you can buy a universal style hose that comes with multiple adaptors and attachments.
Replace the hose
To replace the hose, first remove the stopper assembly. This assembly is typically attached to the drain tailpiece hose. If you cannot get it off, use WD-40 to loosen the retaining nuts. You can also call a plumber to help you with this step if you don't know how to do it yourself. Once you've removed the stopper, turn the retaining nut counterclockwise to disengage the pivot rod. You can use a hex wrench to do this.
Unscrew the two connectors
Next, disconnect the water pipe by unscrewing the two connectors on the black spool. Once you've done that, you're ready to unthread the connector and remove the hose. Then, you can replace the old hose with the new one. You'll want to ensure that the new one is the same size as the old one. If you don't, it might not be as easy as you thought.
The replacement process for the kitchen faucet hose is relatively simple and easy. To begin, disconnect the water valves and pull out the old hose from the faucet. You should then be able to feed the new cylinder through the spout. Lastly, you need to reconnect the water supply to the faucet. Lastly, tighten the new spout nut and try the faucet once more.
Remove the handles
The replacement of the faucet spout can save you a lot of money. To do so, you'll need to disassemble the faucet and remove any kinks in the hose. Once you've removed the spout, you can replace the faucet spout by following the instructions that came with the new spout. You'll need an Allen wrench or flat head screwdriver to remove the handles.
Tighten the nut
Once you've removed the old hose, you'll need to remove the nut. Make sure the nut is on the right side of the faucet so that you don't get water in the wrong place. You can also use a basin wrench to tighten the nut and replace the hose. You'll need to replace the sprayer. Hopefully, the process will be much easier this time around.
Call Nivito customer service
If you're having trouble getting your Nivito https://www.nivito.com.au/ to spray water, you can replace the spray hose by unplugging it. The spray hose is white and is attached to a spool. The spool can be removed by loosening the nuts. If you don't have a wrench, call Nivito customer service. They'll be able to help you install the new spray head.